Friedrich WCVT10B30A
through-the-wall air conditioner · 11,100 BTU cooling · fits ~450 sq ft
A through-the-wall AC rated 11,100 BTU — enough cooling for a room of up to about 450 square feet (ENERGY STAR's room AC sizing chart).
Buy this unit
No verified online listing
A through-the-wall AC is a self-install unit: you set it in the window (or wall sleeve), no contractor or refrigerant charge needed. We have not matched a retail listing for this exact model, so we are not linking one. Search your usual retailer for the model number above — and check the certified specs here against whatever you find.
Sized for ~450 sq ft — measure your room and check your window type before you buy.
The Verified Label — every certified spec
certified 2025-03-13
status: Active
Cooling & efficiency — source: ENERGY STAR / DOE
Fit & install — does it fit your window?
Efficiency & running cost — computed by Verified HVAC Data
Refrigerant & identity
Compare similar room ACs
Frequently asked questions
Is 11,100 BTU right for my room, or should I size up?
About 450 square feet is the guide figure, and 4 certified units sit on that shelf. The next shelf up is 12,000 BTU (80 units), about 550 sq ft. Below it, 10,000 BTU (75 units) covers about 450 sq ft. Between two shelves, take the smaller one: oversizing is the usual reason a unit cools but leaves the room clammy, which our sizing calculator explains.
Does the Friedrich WCVT10B30A need a special outlet?
Yes. It runs on 230 volts, not the 115-volt outlet a bedroom or living room normally has, so it needs a dedicated circuit installed by an electrician. Budget for that before you buy: most units in its 11,000 BTU class are 115-volt, so a same-size alternative may avoid the wiring entirely.
Does the Friedrich WCVT10B30A need a wall sleeve?
Yes — through-the-wall units slide into a wall sleeve. This unit measures 27" wide, 15" tall and 21" deep and weighs about 90 lb. Check that your existing sleeve opening matches, or buy the maker's sleeve.
Sources. Certification and CEER from ENERGY STAR room-AC data and the DOE compliance certification database. Cooling capacity, dimensions and refrigerant are the manufacturer-certified values. Annual running cost, suggested room size and the percentile are computed by Verified HVAC Data from published ratings and EIA U.S. average electricity prices — see our methodology. Refrigerant GWP is the IPCC value. We publish no star ratings and take no payment for placement. "Not published" means the source registry doesn't disclose it — we never fill a spec with a guess.